T3 Connection Quotes

Contact information
First Name*
Last Name*
Phone Number*
Email*
(must be valid to receive quotes!)
Installation information
  Type of connectivity
Company name*
Phone number at installation location (NPA-NXX)*
Installation address
City State Zip
How many locations does your business have?
When does this new connection need to be working?
 
Comments about your business (up to 1000 characters)
* required fields
 
 

Burstable T3

If you have a large company that needs a fast internet connection, there are a few ways to go about doing so. You can get a DS3 line with a good DS3 bandwidth in order to ensure that you are receiving the fastest internet connection available. If you have a large company that needs a fast internet connection, you should research to make sure that you are receiving the best DS3 connection, and the best DS3 pricing.

T-3 lines are used mainly by Internet Service Providers (ISPs) and large companies connecting to the Internet backbone and for the backbone itself.

There are many T3 reviews and comparisons available online. Keep in mind that a large company needs something more than a T1 line and could probably use a T-3 line powered by DS3 technology. The following table shows some of the common line designations:

DS0 - 64 kilobits per second

ISDN - Two DS0 lines plus signaling (16 kilobits per second), or 128 kilobits per second

T1 - 1.544 megabits per second (24 DS0 lines)

T3 - 43.232 megabits per second (28 T1s)

OC3 - 155 megabits per second (84 T1s)

OC12 - 622 megabits per second (4 OC3s)

OC48 - 2.5 gigabits per seconds (4 OC12s)

OC192 - 9.6 gigabits per second (4 OC48s)

A T3 connection is a point-to-point dedicated line that provides 672 64-Kbps voice or data channels or in other words 28 T1 lines. A T3 is used to transmit digital signals at 44.736 megabits per second and has enough bandwidth to transmit full-motion real-time video, and very large databases over a busy network. A T3 line would be installed as a major networking channel for a large corporation or university with high volume network traffic.

When you need more capacity, you often have to buy it in the next available increment, which may end up costing more than you want or can afford to spend. Worse yet, with current, "bursty" application requirements, the need for additional bandwidth can often be as temporary as it is critical.

By providing flexible capacity, or "bandwidth on demand," service providers can help customers deal with variations in traffic, and with avoiding a high fixed monthly payment.

True bandwidth-on-demand services should allow for a wide range in capacity.

Although anybody can purchase a burstable T3, this type of connection can be costly, even as costly as a full 45Mbps connections. As a customer you will not have to pay for the fixed cost of such a large pipe, but will have the benefit of being able to burst up to very high speeds if necessary.

If you have a steady volume and are consistent, you may consider keeping services in house and going with a T3 connection.

Back to Articles



T1 Providers: We work with over 20 reputable T1 Providers and more to offer our clients the best selection of services:

T3 Connection

::HOME  ::ABOUT T3/DS3  ::HOW WE HELP YOU  ::CONTACT US  ::SITE MAP