There are a few different kinds of internet connection that you can purchase I you are looking for a high speed internet connection.  There are t1 T2 T3 connections that different companies or individuals are free to choose from.  The common T1 connection can't handle this growth. Your best option is to research application of a DS3 bandwidth solution.  A DS3 is a leased private dedicated line that goes directly from your office to an Internet Service Provider (ISP). There are many different ways to look for a high speed internet connection.  There are some great high speed internet connections that are perfect for your business.  Whether you decide to get Fractional T3 or Full T3, there is an option for you.

A T3/DS3 connection is equivalent to 28 T1/DS1 connections and uses digital signals on fiber-optic cable at speeds of 45 million bps or 44.736 megabits per second. Generally this type of dedicated line is for 50-100+ users and/or high bandwidth applications. A typical T1 circuit is only 1.5 megabits per second. Usually, a three minute song that is digital is three mega bytes or twenty four megabits in size.

Keep in mind that generally, a DS3 photo is about two mega bytes or 16 megabits. The typical Power Point presentation is ten mega bytes in size or 80 megabits. If 3 or more people in the office were to email a power point presentation at the same time the office internet connection would slow to a crawl for three or more minutes.

This does not take into account all the spam email clogging up your Internet connection while attempting to reach your mail server.

In addition, T3 and DS3 connections can also be used for point to point access.  As a standard used in the North American and Japanese marketplaces, a DS3 can handle 672, 64Kbps voice conversations or one video data channel.

The DS3 line has enough bandwidth to transmit full-motion real-time videos and very large databases over a busy network. Generally a DS3 line would be installed as a major networking channel for a large corporation, research facility, call center, or university with high volume network traffic. But there are multiple smaller scale business uses also. A DS3 Connection is great for companies with large bandwidth needs. It is especially useful as the backbone for Disaster Recovery systems.

If your company needs computer access for about fifty users, or needs to run high bandwidth applications like video conferencing, you are likely in the market for a T3/DS3 connection. A T3/DS3 line is also a viable solution for companies looking to resell bandwidth to their customers.

The common T1 line can handle 24 simultaneous voice calls or a high speed Internet connection speed of 1.54 Mbps. This is usually the solution of choice for small to mid size businesses. A DS3 line can handle 672 simultaneous voice calls or provide a high speed Internet connection of 45 Mbps. The T3/DS3 is typically used by high end data and voice customers as it is the equivalent of 28 T1 lines or 672 voice lines. Most DS3 circuits are "fractional", meaning a portion of the circuit. A DS3 is capable of 45 megabits per second.

Fractional DS3s are usually, 8 megabit per second which is equal to about five (5) T1s. Today this is more than fast enough for most all business needs. The cost of the DS3 circuit is always mileage based. Generally speaking the farther the distance from your ISPs Central Office (CO) connection the more it will cost. On top of that there is often a bandwidth usage charge. DS3 service can be deployed for a wide variety of applications. The most common uses are DS3 point-to-point, DS3 frame relay, DS3 voice, and DS3 VPN. The pricing for these connections varies widely depending on the carrier, location of service and the application for which the connection is being used. Using a free rate quote research service such as DS3-Bandwidth.com will allow you to obtain current pricing for your location.