There are many ways to make sure that you have a great internet connection.  One of the best ways to ensure that this happens is to get a ds3 cable and look into T3 lines.  If you are thinking about getting a T3 line, keep in mind that DS3 circuits provide businesses and Internet Service Providers (ISPs) with up to 45 Mb/s of dedicated Internet connectivity. DS3 and T3 lines are actually the same thing. 

DS3 lines are an ideal solution for users who have outgrown their T1 connections and are in search of unlimited, high-capacity access. A DS3 line actually consists of 672 individual channels, each of which supports 64 Kb/s. DS3 lines are extremely high bandwidth connections into a carrier's backbone.  DS3 lines include SLAs that guarantee uptime and performance.

Digital Signal (DS) is a system of classifying digital circuits according to the rate and format of the signal (DS) and the equipment providing the signals (T). DS and T designations have come to be used synonymously so that DS1 implies T1, and DS3 implies T3. A DS3 line is an ultra high-speed connection capable of transmitting data at rates up to 45 Mbps. A DS3 line is equal to approximately 672 regular voice-grade telephone lines, which is fast enough to transmit full-motion, real-time video, and very large databases over a busy network.

A DS3 line is normally installed as a major networking artery for large corporations and universities with high-volume network traffic. Other example applications include large call centers, enterprise wide VoIP and IP PBX systems, Internet service providers, research labs, video conference centers and software development companies. A DS3 is the second fastest, non optical connection offered in North America.

A DS3 line is comprised of twenty eight T1 lines, each operating at total signaling rate of 1.544 Mbps. Don't be confused about the difference between DS3 and T3 circuits. These terms are really synonymous. Instead you should focus on what they can do for you...and the best scenarios for application.

A S3 signal is composed of 28 DS1 signals and is constructed using a two-step multiplexing process. First, the 28 DS1 signals are multiplexed into seven DS2 signals. Second, the seven DS2 signals are multiplexed into one DS3 signal. Each multiplexing step uses bit stuffing to handle the different input frequencies. Overhead bits provide alignment, error checking, in-band communications, and bit stuffing control information.

DS Internet Access is the ideal solution for businesses that require high-bandwidth access at a reduced price. Whether you host high-traffic Web sites, support Web hosting or need high-capacity bandwidth on an as-needed basis, there's a level of DS3 service (Full or fractional) that will meet your needs. Fractional to full DS3 or T3 circuits run from speeds of 3 Mbps up to 45 Mbps.

DS3 service can be deployed for a wide array of applications. Usually, T3 is used for point-to-point, DS3 internet, DS3 frame relay, DS3 voice and DS3 VPN. The pricing for these connections varies widely depending on the carrier, location of service and the application for which the connection is being used. Visit DS3 Bandwidth to obtain current "real time" rate quotes for your location.

A DS3 connection is comprised up of two monthly charges: the local loop and the port charge. The local loop charge is the cost of the circuit provided by the Local Exchange Carrier (LEC) that allows DS3 access into the carrier's network. Nearly every carrier prices loops differently so it is in your best interest to price DS3 service with several providers to ensure that you get the best deal. For customers that require more bandwidth than a T1 line can provide but do not yet require the capacity of a full DS3 line, a fractional DS3 connection is the best solution.